PentaComm Satellite Communicator
Unit contains satellite transceiver and input circuitry to connect up to five
data signals. Either 4-20ma or 0-5 volt signals may be connected in combination.
The enclosure meets the most demanding requirements. Many customizable options.
More...
|
| |
 |
| |
SMS Wireless Tank Monitor
A wireless, single-tank, liquid-level monitor. It reports a tank level using
SMS (Small Message Service) technology of the digital cellular phone infrastructure.
The receiver of the data needs only a cellular phone with SMS service to setup and
acquire data.
More...
|
| |
|
| |
Diver RF DP
The model 9146 Diver RF is a hardened version of the model 9145 that is suitable
for most non-vented, solvent based liquids.
More...
|
| |
|
| |
Wireless Level Alarm
The 9177 receiver and the model 9178 transmitter are a wireless liquid-level
alarm system used to detect either high level (standard) or low level conditions.
More...
|
| |
|
 |
 |
Products |
|
| |
 |
From application engineering
to final installation, we design a solution that
matches your exact needs, now and in the future.
You have bulk-management challenges. We have
bulk-management solutions.
| If you need assistance in
determining which product is perfect for
your application, Please fill out and
fax us the
Ask the Experts pdf file. |
|
|
|
Enlarge
|
|
Model 9035A Tank Monitor II
|
| |
|
The Tank Monitor II is a full feature,
programmable liquid inventory monitoring
and controlling system. It has a
variety of input and output capabilities.
It is ideal for those single tank
applications needing a local display
and/or remote monitoring capability via the
optional modem. Pump control and high/low
level alarms are also features of the
Tank Monitor II.
|
| |
|
Enlarge
|
|
Model 9143 Diver
|
| |
|
The Level Devil 9143 Diver is a state-of-the art,
integrated pressure gauge and modem. It reports the level of
a single liquid storage tank. It is housed in a tubular
shaped housing allowing the unit to be lowered through a
tank's top opening to rest on the bottom. The phone
cable is enclosed in a plastic tube for protection and it
provides a vent to the atmosphere for the low pressure
side of the integrated differential pressure gauge.
Electrical power used to operate the Diver is obtained
from the phone line connection. The Diver is a very low
powered device (it sleeps a lot) and can run for hours
with energy stored in its energy storing capacitor.
No batteries are used and it recharges every time
it communicates.
|
| |
|
Enlarge
|
|
9176 SMS Wireless Tank Monitor
|
| |
|
The model 9176 is a wireless, single-tank, liquid-level monitor.
It reports a tank level using SMS (Small Message Service)
technology of the digital cellular phone infrastructure. The
receiver of the data needs only a cellular phone with SMS
service to setup and acquire data.
|
| |
|
|
|
|
|
|
Enlarge
|
|
9172 PentaComm
Satellite
Communicator |
| |
|
The 9172 PentaComm
rugged enclosure
allows it to meet
the most demanding
requirements. This
model contains a
battery, satellite
transceiver, and
input circuitry to
connect up to five
data signals. Either
4-20ma or 0-5 volt
signals may be
connected in any
combination. Several
options are
available to help
customize the
PentaComm for
specific
applications.
|
| |
|
Enlarge
|
|
9177/9178 Wireless
Level Alarm |
| |
|
The models 9177 and
9178 are a wireless
liquid level alarm
system used to
detect either high
or low level
conditions. Alarms
are detected by the
9178 are transmitted
wirelessly to a 9177
receiver and
eliminates the need
for conduit and
cables from the
tank.
|
| |
|
Enlarge
|
|
Model 9023A Tank
Teller II |
| |
|
The Tank Teller II
is a full feature,
programmable liquid
inventory monitoring
and controlling
modular system. It
consists of at least
2 components: the
continuously powered
Tank Teller II and a
minimum of 1 sensor
to measure the level
in any type of
vessel. It can
handle up to 99
tanks with multiple
other input and
output capabilities. |
| |
|
Enlarge
|
|
Model 9032A Reporter II
|
| |
|
The Reporter II is a full feature, programmable liquid inventory
monitoring and controlling modular system. It consists of at least 2
components: the continuously powered Reporter II and a minimum of 1
sensor to measure the level in any type of vessel. It can handle up
to 6 tanks with multiple other input and output capabilities.
|
| |
|
Enlarge
|
|
Model 9142 Plug and Play Satellite Transmitter
|
| |
| The 9142 is a full feature, programmable liquid inventory monitoring
and controlling modular system. It consists of at least 2 components: the
continuously powered 9142 and a minimum of 1 sensor to measure the level
in any type of vessel. It can handle up to 2 tanks with multiple other
input and output capabilities.
|
| |
|
Enlarge
|
|
Model 9115 Lil' Devil
|
| |
|
The Lil' Devil is an economical tank level measurement system designed
to obtain and store level data. Each remote transmit unit (RTU) has the
capability to monitor up to 4 tanks. The RTU uses bubbler technology to
measure the air pressure required to release a small amount of air into
the liquid. The microprocessor can then determine the amount of product
in the tank based on this measured pressure. An internal modem is provided
that allows a call to be placed at a specific time, and stored data for
each tank can be transmitted to a remote computer for level reporting,
delivery / pick-up scheduling, purchasing, monthly invoicing, and a variety
of other activities. The Lil' Devil can also receive calls for access to
this information. Level Devil software is required for communications and
reporting support. |
| |
|
|
|
|
|
Enlarge
|
|
Model 9025A PVC Digital Ultrasonic Sensor
|
| |
|
Liquid level measurement instrument. The 9025A provides an efficient,
reliable and cost effective means of level reporting and control. The
9025A features built-in temperature compensation and digital output
displayable on most Level Devil controllers.
|
| |
|
Enlarge
|
|
Model 9071P PVC 4-20mA Ultrasonic Sensor
|
| |
|
The 9071P provides an efficient, reliable and cost effective means
of level reporting and control. The 9071P is a microprocessor
controlled unit featuring built-in temperature compensation and
rotary switches for ease of calibration. It provides an industry
standard 4-20mADC output signal.
|
| |
|
Enlarge
|
|
Model 505 Two wire 4-20mA Ultrasonic Sensor
|
| |
|
The 505-2400 Series Continuous ultrasonic level transmitter provides
superior performance previously not available in a two-wire ultrasonic
transmitter with a range of up to 30 feet. The compact transducer
design allows mounting in any 2-inch nozzle. It also allows for a
recessed nozzle mounting, enabling the user to measure from the very
top of the tank. The automatic profiling (tank mapping) eliminates
interfering signals from agitators and other obstructions in the vessel
without the need to empty the vessel. The level measurement output is a
4-20 mA current signal. Ideal for use in Explosion-hazard areas, you can
configure the unit using the integral switches, without power, at the
vessel or in the shop. Unit can be set up before placing it in a hazardous
area.
|
| |
|
|
|
|
|
Enlarge
|
|
Model IGP20 Gauge Pressure Transmitter
|
| |
|
The IGP20 Gauge Pressure Transmitter reliably measures absolute and gauge pressure
of gasses, vapors, and liquids. These process variables are converted into standard
analog DC signals (4-20mA) which are supplied to the process control and monitoring
equipment. Unique internal design makes this sensor stable over a wide temperature
range and protects the device from over-pressure to greater than 3000 psi.
|
| |
|
Enlarge
|
|
Model IDP10 Differential Pressure Transmitter
|
| |
|
The IDP10 Differential Pressure Transmitter reliably measures differential
pressure of gasses, vapors and liquids. These process variables are
converted into standard analog DC signals (4-20mA) which are supplied
to the process control and monitoring equipment. Unique internal design
makes this DP stable over a wide temperature range and protects the
device from over pressure to greater than 3000 psi.
|
| |
|
Enlarge
|
|
Model PTX 1240 Submersible Pressure Transmitter
|
| |
|
Submersible pressure transmitter is designed to provide the convenience
of direct submergence in many types of liquids for quick, accurate, and
reliable level measurement. The simple design and rugged 316 Stainless
Steel construction provide long lasting service with long term stability
and virtually no maintenance. Applications for the PTX 1240 include measuring
the liquid level in tanks, ponds, rivers, water wells, bins, and flood channels.
|
| |
| |
|
Enlarge
|
|
Model 9145 Diver RF / 9140 Receiver
|
| |
|
An integrated differential pressure gauge and RF transmitter. The level
of a single, liquid storage tank is transmitted to a local receiver by a RF
data link. A pressure gauge at the bottom of the tank connects to a battery
powered or solar powered RF transmitter attached to the top of the tank.
This transmitter then relays level data to a receiver connected to an analog
phone line. The differential pressure gauge is vented into the top of the
tank and can accurately report the level when the tank is pressurized.
|
| |
|
Enlarge
|
|
Model 9146 Diver RF / 9140 Receiver
|
| |
|
An integrated differential pressure gauge and RF transmitter. The level of a
single, liquid storage tank is transmitted to a local receiver by a RF
data link. A pressure gauge at the bottom of the tank connects to a battery
powered or solar powered RF transmitter attached to the top of the tank.
This transmitter then relays level data to a receiver connected to an
analog phone line. The differential pressure gauge is vented into the top
of the tank and can accurately report the level when the tank is pressurized.
|
| |
|
|
|
|
|
|
|
|
|
 |
|
Level Devil Software |
| |
|
The Level Devil software suite of products has many advanced features
including Manual Call, auto calling, plotting and tabular displays,
programming, Auto-Answer, Automation, and Email Receiver |
| |
|
|
|
|
Warranty information (excluding software)
|
|
|
|
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)