Electronic Sensors, Inc.

User ID:  

Password:  

Customer Login
Home Products Services About Contact
Vendor Managed Inventory
Leveldevil Software Demo
Frequently Asked Questions
Product Manuals
Lubricants and Oils
Careers
ESI Webmail

PentaComm Satellite Communicator

Unit contains satellite transceiver and input circuitry to connect up to five data signals. Either 4-20ma or 0-5 volt signals may be connected in combination.The enclosure meets the most demanding requirements. Many customizable options.More...

 
 

SMS Wireless Tank Monitor

A wireless, single-tank, liquid-level monitor. It reports a tank level usingSMS (Small Message Service) technology of the digital cellular phone infrastructure.The receiver of the data needs only a cellular phone with SMS service to setup and acquire data.More...

 
 

Wireless Level Alarm

The 9177 receiver and the model 9178 transmitter are a wireless liquid-level alarm system used to detect either high level (standard) or low level conditions.More...

 

 

9146 Diver RF / 9140 Receiver

Previous page
 

Description: The Level Devil* 9146 Diver RF* is a state-of-the-art, integrated differential pressure gauge and RF (radio frequency) transmitter. The level of a single, liquid storage tank is transmitted to a local receiver by a RF data link. A pressure gauge at the bottom of the tank connects to a battery powered or solar powered RF transmitter attached to the top of the tank. This transmitter then relays level data to a receiver connected to an analog phone line. The differential pressure gauge is vented into the top of the tank and can accurately report the level when the tank is pressurized.

(Diver pictured at right with solar cell and transmitter.)

Operation: Installation of the 9146 Diver RF* is simple and inexpensive. The Diver RF* probe is lowered through a tank's top opening to rest on the bottom. The transmitter threads into a 2 inch NPT tank opening. Compared with the 9145 Diver RF*, the rugged construction of the 9146 sensor provides increased accuracy and temperature range. The sensor is suitable for use in a broader range of products.

Specifications

Monitoringt capability:9146 Diver RF*: 1 Tank
9140 Receiver: 4 Tanks (RM4)
9140 Receiver: 6 Tanks (RM6)
9140 Receiver: 30 Tanks (RM30)
Operating temp:9146 Diver RF*: -20 deg F to 185 deg F
9140 Receiver: -20 deg F to 140 deg F
Power source:9146 Diver RF*: solar cell or lithium battery
9140 Receiver:120 VAC, 60 Hz
Sensor range:5 psi, 8 feet cable length
5 psi, 15 feet cable length
10 psi, 25 feet cable length
25 psi, 35 feet cable length
25 psi, 50 feet cable length
Exposed sensor material:Stainless steel, aluminum, Nylon, Viton (R), Nitrile (Buna-N) rubber, Nylon 11
Weight:9146 Diver RF*: 5.0 lbs.
9140 Receiver: 1.0 lbs.
Dimensions:9146 Diver RF*: 2.1" D X 11.04" L
Check the 9146 PDF literature for more information.
Mounting:Sensor rests on bottom of tank, Transmitter screws into 2 inch NPT
Communications:9140 Receiver connects to a standard phone line jack.

Maximum distance to tank transmitters: 1500 feet

Level Devil* software (Required, sold separately)
Web Data Posting (Optional, per contract)
Diver RF is a registered trademark of Electronic Sensors, Inc.


Specifications subject to change without notice.


 
Copyright (c) 2007 Electronic Sensors, Inc. All rights reserved.
LevelDevil is a registered trademark of Electronic Sensors, Inc.